Florida On-site Dry Ice Blasting

Service Areas:

Miami Area & Tampa/St.Pete

Dry Ice Blasting Inc. Miami and Tampa Florida

Automotive Dry Ice Blasting Applications

Dry Ice Blasting Inc. can help to address a variety of cleaning issues within the automotive industry. Dry ice blasting can help to reduce costs by as much as 60-70% versus using traditional cleaning methods.  This environmentally friendly process is non-abrasive with minimal secondary waste. The cleaning can be performed on site without disassembly of the equipment which limits costly downtime, helps to increase productivity and potential damage to equipment. Dry ice blasting can effectively remove grease, tar, oil, adhesives including decals, petroleum, resins and manufacturing by products.

Aviation Dry Ice Blasting Applications

Dry Ice Blasting Inc. is an ideal application for the aviation industry. Dry ice blasting can clean a variety of surfaces quickly with no drying time and disassembly. This saves production time and cuts overall cleaning costs. It is safe to use around electrical components and delicate surfaces. It can remove contaminants such as brake dust, residues, carbon deposits, engine exhaust and adhesives.

Circuit Board Manufacturing Dry Ice Blasting Applications

We are able to clean all SMT, PCB and THT assembly equipment on-site therefore reducing the costs of cleaning and crucial preventative maintenance. There is no moisture in dry ice blasting therefore making it safe for cleaning without damaging the electronics. Also efficiently cleans all debris without damaging the equipment surfaces.

Energy/Electrical Dry Ice Blasting Applications

Dry Ice Blasting Inc. can help to keep power generation and electrical equipment clean and operating at peak performance. The process is non-conductive and leaves no secondary waste. It is environmentally friendly and reduces outage time up to 65%. No disassembly or cool down is needed. It helps to reduce thermal dissipation and catastrophic failure, improve megohm readings and increase polarization indices.

Fire Restoration Dry Ice Blasting Applications

Dry Ice Blasting Inc. provides a quick and efficient way to remove smoke damage without damaging structural integrity. Dry ice can remove soot and reduce smoke odor. The cleaning service can also reduce labor costs by completing the work quicker than traditional cleaning. The chemical free process also eliminates secondary waste. Safe to use on wood, metal, brick and concrete.

Food & Beverage Industry Dry Ice Blasting Applications

Dry Ice Blasting Inc. provides environmentally responsible cleaning for the food and beverage industry. This method is non-conductive and non-abrasive and eliminates the need for water and harsh chemicals. The dry ice is food grade quality which helps to decontaminate the surfaces from harmful bacteria. It is effective on metal and plastic surfaces. No disassembly is needed and can be completed while online and hot.

General Maintenance Dry Ice Blasting Applications

Dry Ice Blasting Inc. can help keep production facilities clean and safely. By completing scheduled cleaning maintenance, the facility can reduce/eliminate repair, extend the the life of motors, and avoid rental and replacement costs. Dry Ice Blasting Inc. offers on site cleaning with no cool down or disassembly. The process is non-abrasive and non-toxic by removing grease, oil, soot and dirt from equipment without the use of water. Dry ice is safe around electrical systems and hydraulic units. It can also decontaminate and sanitize production surfaces.

Historical Restoration Dry Ice Blasting Applications

Dry Ice Blasting Inc. can assist in restoring historical buildings and structures back to their original states. CO2 blasting is non-abrasive and uses no toxic chemicals or solvents. The process does not damage the substrate and leaves no secondary waste. It effectively cleans brick, stone, wood, metal even in tight areas.

Marine Dry Ice Blasting Applications

Dry Ice Blasting Inc. offers marine cleaning services that are environmentally friendly and less harmful than other methods such as pressure washing which leave behind solvents and waste. Dry ice blasting also works to sanitize the surface helping to prevent regrowth of algae, mussels and sea slime. It is cost effective by reducing labor costs and downtime. By scheduling routine cleanings, marine performance will be maintained and improved.

Mold Remediation Dry Ice Blasting Applications

Dry Ice Blasting Inc. can effectively and safely remove mold spores. Dry ice blasting can dramatically reduce clean up time and prevent reoccurence. The cleaning system is non-toxic and uses no chemicals. It is safe to use on wood, metal, concrete and brick. It cuts cleaning time by 80% while removed 99% of mold spores from wood.

Packaging Dry Ice Blasting Applications

Using dry ice blasting to clean and sanitize packaging equipment saves unnecessary downtime and production costs. Dry ice blasting removes build up from belts and packaging equipment without interrupting production. The non-abrasive cleaning is environmentally safe and will not damage equipment. Dry ice also generates no secondary waste and reduces over cleaning costs.

Plastics Dry Ice Blasting Applications

Dry Ice Blasting Inc. offers plastic manufacturers a safe alternative to clean molds and equipment. By using dry ice blasting, the cleaning can remove surface residues, release agents, resins and build up. Industry standards require clean molds to minimize issues in production. Dry ice blasting improves product quality by safely cleaning while the equipment is hot, in place and without harmful chemicals.

Printing Dry Ice Blasting Applications

Dry Ice Blasting Inc provides a quick and efficient way to remove ink, oil, grease and other build up from printing presses, rollers and ink trays. Dry ice is non toxic and non-abrasive allowing for online cleaning without disassembly. Regular maintenance reduces wear on the machines and improves print quality.

Rubber Dry Ice Blasting Applications

Dry Ice Blasting Inc allows for cleaning of rubber mold without costly shutdowns. The cleaning can be completed on site with no major disassembly. It is a non-abrasive cleaning system which will not damage molds. Traditional cleaning methods like scraping or other types of blasting can damage the molds along with increased cleaning time and lost productivity. No cool down is needed along with no secondary waste by removing product residues and release agents in less time.

Request A Quote

Online Quotes or Questions
19.JPG 20.JPG 21.JPG 22.JPG 1.JPG 2.JPG 3.JPG 4.JPG 5.JPG 6.JPG 7.JPG 8.JPG 9.JPG 10.JPG 11.JPG 12.JPG 13.JPG 14.JPG 15.JPG 16.JPG 17.JPG 18.JPG